Brief Introduction: The material is made of Aluminum and polycarbonate. It is mainly used in stores and shopping mall. If you are interested, please kindly contact us by email, Whats App, Facebook or viber.
1, The size of PC slat is 10X30cm,
2, Aluminum links can be connected between two slats.
3, Use Australian roller door motor, low noisy and lift smoothly.
4, the door have spring to make lift easily by hand if power off.
5, using transmitter to open and close the door.
1. Almost transparent, displays can be seen when shop is closed
2. High security, near steel strength
3.Virtually indestructible, fabricated from extruded aluminum/ stainless steel, weather seal and trust proof with polycarbonate glazing making the shutter almost indestructible.
4. Electrical operating, fast and easy roll up and roll down
5. Ideal for shopping malls and high profile shops
6. Stable performance with two years warranty
7. Professional manufacture factory with strict quality control
8. Good service is the promise of the deal.
The production steps:
PC door hardware:
Roller door motor:
1, Soft start and soft stop
2, waterproof cover for roller door motor and control box.
3, 100W transformer and supply more lift power
4, can be connected kinds of options, such as photo beam, battery, external receiver and so on.
5, automatic safety reverse function to protect people;
6, low noisy
7, 350N output
Input voltage available:
1. 220V±10%, 50Hz
2. 110V or 127V 60Hz
220VAC±10% - 24VAC
2. relative humidity<90%
Packages and loading container: