3mm, 4mm, 5mm thickness finger protection panel and non finger protection panel, the material is made of Aluminum and polycarbonate and PU foam. This kind of door can be used in car 4S store or exhibition center and so on.
1, Unique Transparent, Elegant anodized aluminum frame
2, The thickness is from 3mm to 5mm, and the pc salts have single layer and double layer
3, UV proof
4, All sections can be replaced in easy way
5, The frame color can be chosen by customer, such as white, coffee, brown and so on.
1. Strong material
The door panel is made of aluminum and polycarbonate and is highly resistant to corrosion.
2. Surface treatment of the door panel
The surface is machined with wood grain and a three-dimensional engraving machine, which makes the door panel have a three-dimensional structure. Different powder coatings give the door panel a strong three-dimensional feel. It not only increases the strength, but also beautifies the appearance. The color is usually white, harmonizing with the surrounding environment and keeping the interior of the garage door bright and soft.
3. Inside the door panel
The board is filled with PU foam and has a density of not less than 45 kg/m3, far exceeding the trade standard of 38 kg/m3. This material is a worldwide material with good thermal and thermal insulation properties. The insulation parameter is 7.5 and has good insulation.
4. Door panel structure
The width and height of the door panel are determined by the customer. The bottom of the door is fitted with tubular rubber for good sealing and can withstand slightly uneven ground, separated from wind, rain and sunlight. The single door blade has a pressure difference of 20 Pa, no wind leakage, and the composite door leaf has a pressure difference of 40 Pa, and there is no air leakage.
5. The door panel will ensure that the color does not fade, and the paint surface will not fall under perfect conditions for a long time.