Segmented Garage Door This is a very interesting door because it is deeper than a typical roller shutter because it does not have an "industrial look." Although not the cheapest garage door, these doors do not increase the overall look of your property. The panels are hinged together, allowing each panel to move independently of each other. In the garage itself, you will have a vertical track mounted on either side of the garage door and the song will continue on each side of the door.
1, Material: galvanized steel sandwich panel with PU foaming.
2, Panel thickness: 40mm
3, Steel thickness: 0.35mm
4, Finished: Three lines and three layers, front and back are steel material, PU foam inside.
5, single panel height: 425-500mm, customer can change any height between this space.
6, Panel property: heat preservation, heat protection, dust protect
7,color: based on RAL color card, usually we use RAL9001,9002, 9010, 6009, 7016, 8014 etc. customer also can choose any other color what need.
8, Timber colors: Golden Oak, Dark oak, etc.
1. For a separate garage door, this lock allows you to activate the clutch unit with an external key and open the door when there is no power to the entrance or side door.
2. If there are any obstacles in the downward process, the door will automatically rise
3. When the spring breaks, the door can automatically stop to prevent the door from falling.
4. Once the cable breaks, the device will be blocked on the rail to prevent the wire from breaking and prevent the door from falling.
5. Helps to improve the strength of the door panel. The thickness is 1.0mm and the height is 80mm. The door fence can resist the hurricane.