Solid steel shaft with keyway
Galvanized outside D=25.4mm
L=6mm Max. load=3.75kg/m
If you are interested, welcome to contact us by email, Whats App, Facebook or viber.
A through hole is formed in the center of the shaft body, and an inner key groove is formed in the through hole. The outer surface of the shaft body is machined with a stepped cylinder and has a key groove, and the central through hole of the shaft is sleeved with the spindle of the pressing shaft. The input power is transmitted directly to the squeeze spindle through the drive gear mounted on the cylinder on the outer surface of the shaft.
The space occupied by the hollow shaft is relatively large, but the weight can be reduced. According to the mechanical analysis of the material, when the torque is transmitted through the shaft, the effect of transmitting the effective torque is greater as the outer section is viewed from the radial section. A thicker shaft diameter is required when the shaft needs to transmit a large torque. Since the effect of transmitting torque at the axial portion is small, hollow is generally used to reduce the weight of the rotating shaft.