Garage Door Hinges/ Side Hinge

Normal panel hinges The hinges are: 0#, 1#, 2#, 3#, 4#, 5#, 6# Thickness: 1.5mm, 1.8 mm, 2.0mm Material: Bright zinc plated steel hinge For non-finger protection panel Finger protection panel hinge The hinges are middle hinge and side hinges Thickness: 2.0mm, 2.5mm Material: bright zinc plated...

Product Details

Normal panel hinges

The hinges are: 0#, 1#, 2#, 3#, 4#, 5#, 6#

Thickness: 1.5mm, 1.8 mm, 2.0mm

Material: Bright zinc plated steel hinge

For non-finger protection panel

 图片13.png图片14.png           

Finger protection panel hinge

The hinges are middle hinge and side hinges

Thickness: 2.0mm, 2.5mm

Material: bright zinc plated hinge

图片15.png图片16.png

图片17.png 


The door hinge comprises: a hinge seat and a hinge body, one end of the hinge body is connected to the door frame through the mandrel, and the other end is connected to the door leaf; the hinge body is divided into two sections, one section is connected with the mandrel, the other section is connected with the door leaf, and the other section is connected with the door leaf. The bodies are connected into a whole by a connecting plate, and the connecting plate is provided with a door gap adjusting hole. Since the hinge body is divided into two sections and connected by a connecting plate as a whole, the connecting panel can be removed and the door leaf can be removed for repair. The door gap adjusting hole of the connecting plate includes: a long hole for adjusting the gap between the upper and lower doors and a long hole for adjusting the gap between the left and right doors. The hinge can be adjusted not only up and down, but also left and right.

Inquiry

Related Products